Back to Top

Products

Pressure Membrane Extractor, 100 Bars

Pressure Membrane Extractor, 100 Bars

The 1020, 100 Bar Pressure Membrane Extractor, is used to analyze the water-holding characteristics of soil samples at extremely high pressures. The Pressure Membrane Extractor uses a cellulose membrane supported on a screen drain plate. The cylinder is 2" (5 cm) high, with an inside diameter of 10" (25 cm). The 1020 consists of top and bottom plates, cylinder, all connecting bolts and seals, screen drain plate, and a side exhaust valve. A high pressure hose for connecting the extractor to a pressure source must be ordered separately.

Trillium 120 P/PA Broadband

Trillium 120 P/PA Broadband Seismometer

A compact portable sensor offering superior broadband performance over a wide temperature range with very low self noise. This low self-noise makes the Trillium 120P/PA ideal for local, regional and tele-seismic studies in both observatory and portable applications. Portable network users will appreciate the low power consumption and reliable operation over a temperature range of ±45ºC without re-centering. The Trillium PA offers the added benefit of fast "one touch" motorized mass centering.

Continuous Monitoring Station

Continuous Monitoring Station

The instrument allows measurement of the soil degassing of carbon dioxide, hydrogen sulfide, methane and of the related environmental parameters.

Applications for Continuous Monitoring Station

  • vulcanology to understand the dynamics of volcanoes and for a global evaluation of the hazard connected with volcanic activity;
  • monitoring of geothermal areas;
  • soil respiration;
  • survey of landfill biogas emissions.

Flux measurement range:

Gamma Radiation in Air

Model R503X-SL

Model R503X-SL

Gamma Radiation Sensor (in air).

Detector: Proportional counting tube with power compensation filter.

Measuring Range: 10 nSv/h to 15 mSv/h. 

Energy Range: 6 KeV to 1.2 MeV fot the whole measuring range.

TAURO-2000/3000 (OEM) Series

TAURO 2

The RTUs (Remote Terminal Units) TAURO-2000/3000 Series, are essentially intelligent electronic devices, specifically designed for data acquisition, data and alarm transmission and control functions, to be installed at remote locations, serving as efficient front-end for SCADA applications in a variety of industries.

15 Bar Ceramic Plate Extractor

15 Bar Ceramic Plate Extractor image

The 1500F2, 15 Bar Pressure Plate Extractor, is used to analyze the water-holding characteristics of soil samples throughout the pressure range of interest in most agricultural applications. The pressure vessel is 4" (10 cm) deep and has an inside diameter of 12" (30 cm). Up to 4 ceramic plates can be accomodated at one time, allowing approximately 36 2-1/4" samples to be analyzed simultaneously. The Pressure Plate Extractor consists of a pressure vessel and lid, clamping bolts, O-ring seals, and outflow tube assemblies.

Applications

Round Bottom Neck Top Cup 1.41in

Round Bottom Neck Top Cup 1.41in

Developed from a high fired Alumina body. Extremely porous, inert to most all solutions, possesses hard exterior and interior surfaces, and pure white in color. Recommended for standard pressure differentials under 1 Bar (14.5 psi). Typical bubbling pressure: 28 - 32 psi. Effective pore size: 2.5 microns. Hydraulic conductivity: .0000086 cm/sec. Approximate porosity: 45% by vol. Flow through

Pages