Back to Top

Products

Ground Conductivity Meter- EM31

Ground Conductivity Meter EM31

EM31-MK2

The EM31-MK2 maps geologic variations, groundwater contaminants, or any subsurface feature associated with changes in ground conductivity. Using a patented electromagnetic inductive technique that allows measurements without electrodes or ground contact. With this inductive method, surveys can be carried out under most geologic conditions including those of high surface resistivity such as sand, gravel, and asphalt.

Trillium Borehole Broadband

Trillium Borehole Broadband Seismometer

The Trillium Borehole Seismometer is a very broadband seismometer designed for cased borehole deployments. The instrument is housed in a stainless steel enclosure incorporating a hole-lock mechanism to allow the instrument to be coupled to a deep borehole casing. Instrument recovery is aided by a fail-safe holelock release mechanism that prevents jamming to the casement during removal.

An advanced levelling system allows the unit to operate over a tilt range of +/-5 degrees. The axis stack is mechanically levelled to ensure that the vertical axis does not couple horizontal noise.

Trident 305 Digitizer

Seismograph- Trident 305 Digitizer

The Trident is an industry leading digitizer, designed for use with the Taurus Portable Seismograph or Cygnus transceiver. The Trident features 24 bit performance in a compact, robust package offering typical dynamic range of 142 dB. The Trident Digitiser’s versatility allows for an optimal network design flexibility. Numerous Trident digitizers can be daisy-chained to form a multi-channel system. Such scalability makes Trident well suited to fixed, portable and structural monitoring networks.

Gamma Radiation in Air

Model R503X-SL

Model R503X-SL

Gamma Radiation Sensor (in air).

Detector: Proportional counting tube with power compensation filter.

Measuring Range: 10 nSv/h to 15 mSv/h. 

Energy Range: 6 KeV to 1.2 MeV fot the whole measuring range.

Meshgen

screen shot of Meshgen

The program consists of two standard modules, the Geometry Modeller and the FE-mesh Generator, and several other customizable modules for pre- and post-processing data (defining domain properties, boundary conditions and graphical display of results).

MESHGEN Plus has been used as a base library for the development of HYDRUS 2D/3D. Currently we are finishing a new version of MESHGEN Plus that can be used either as a stand-alone application (for preparing data for other FEM programs - see Meshgen Area 2011) or for the rapid development of new FEA programs.

Electromagnetic- Time Domain Systems

Electromagnetic- Time Domain Systems TEM47

The modular design of the PROTEM Time Domain Electromagnetic (TDEM) Systems – a single receiver with multiple, interchangeable transmitters and receiver coils – provides the flexibility required to accommodate a broad range of applications, from near-surface environmental and engineering studies, to three-component resource exploration at depths of 1000 m or more.

PROTEM Receiver: the base component of any PROTEM system, the PROTEM Receiver provides superior data quality and reliable operation

Gravity Meter- CG-5 Autograv

CG-5 Autograv Gravity Meter

The Scintrex CG-5 maximizes your productivity delivering superior data repeatability in rough field terrain. Station positions are measured with the integrated GPS capability.

Internal GPS and precise clock for X-Y positions and earth tide corrections

Pages